May 27-29, 2019 in Tagaytay-city, the Philippines
Asia Nano Forum(ANF) had ANF SUMMIT on May27 this year, and also 2019 INTERNATIONAL NANOTECHNOLOGY CONFERENCE in the PHILIPPINES（INCP2019）on May 28-29.
INCP 2019 will provide excellent opportunities to the researchers, scientists, students, professionals, and industrialists to be exposed on the current innovations on the different fields of nanotechnology., exchange ideas and discover opportunities. Especially, on 29 May in PLENARY LECTURES V: Nanotechnology Commercialization Workshop, Nano Malaysia, INIC and the Philippines’ startups introduced their activities.
On May 27, ANF organized ANF SUMMIT 2019 at Taal Vista Lodge in Tagaytay City, PHILIPPINES. At first, Dr. Annabelle V.Briones had Welcome Remarks. Then, we took Annual General Meeting(AGM), and each country introduced their science and technologies’ policies and activities as is customary with ANF SUMMIT. This time we could have a fruitful discussion aggressively.
In the afternoon, we had working group presentations. 3 working groups(Standardization, Nanosafety and Risk Management, Commercialization) explained their activities. Moreover, we decided Host of ANF Summit 2020/2021 and elected Next ANF office bearers.
INCP 2019 PROGRAMME
27 May 2019
10:00 – 16:00
Participants Registration and Conference Kits Collection
13:00 – 17:00
Advanced Materials Characterization Workshop
- Advanced Techniques (Modes) in Atomic Force Microscope
- Latest Innovations in Scanning Electron Microscope
- Particle Characterization of Nanomaterials
28 May 2019
8:00 – 8:30
Registration
8:31 – 8:40
National Anthem and Invocation
8:41 – 4:50
Welcome Remarks
Dr. Leah J. Buendia
Assistant Secretary for International Cooperation
Department of Science and Technology
Republic of the Philippines
8:51 – 9:51
Keynote Lecture: All Extremes Meet Nano
Dr. Toshihiko Kanayama
President, Asia Nano Forum
Special Emeritus Advisor
National Institute of Advanced Industrial Science and Technology (AIST), Japan
9:51 – 10:10
Coffee Break
PLENARY LECTURES I
10:11 – 10:30
Iran’s model of nanotechnology development
Prof. Saeed Sarkar
Secretary General Iran Nanotechnology Innovation Council (INIC)
Vice Presidency for Science and Technology
10:31 – 10:50
Nanotechnology in the Time of Changes
Dr. Wannee Chinsirikul
Executive Director
National Nanotechnology Center (NANOTEC), Thailand
10:51 – 11:10
Malaysia Status and Progress, regarding Nanotechnology
Kamarulzaman Bin Kamaruddin
Director
National Nanotechnology Centre (NNC)
Ministry of Energy, Science, Technology, Environment & Climate Change (MESTECC) Malaysia
11:11 – 11:30
Nanotechnology in Additive Manufacturing
Dr. Rigoberto C. Advincula
Professor
Case Western Reserve University, Cleveland, Ohio, USA
11:31 – 11:50
Picture Taking
11:51 – 12:40
LUNCH BREAK
28 May 2019
PLENARY LECTURES II
12:41 – 13:00
Nanoprocess-Applied 3D LSI Packaging Technology
Dr. Masahiro Aoyagi
Director of Collaboration Promotion Unit TIA Central Office
National Institute of Advanced Industrial Science and Technology (AIST), Japan
13:01 – 13:20
Thailand Nano-Safety & Standardization Initiative for Sustainable Technology Development
Ramjitti Indaraprasirt
Manager
Nanosafety Alliance Section National Nanotechnology Center (NANOTEC), Thailand
13:21 – 13:40
Nanosafety in Vietnam
Quang Le Dang, Ph.D.
Director/ Principal Researcher
R&D Center of Bioactive Compounds Vietnam Institute of Industrial Chemistry (VIIC), Vietnam
13:41 – 14:00
Alternative Methods for Safety Assessment of Nanomaterials and Quality System for Toxicology Service
Rawiwan Maniratanachote, PhD
Senior Researcher
National Science and Technology Development Agency, Thailand
14:01 – 14:20
Coffee Break
PLENARY LECTURES III
14:21 – 14:40
Advanced Nanocomposites Based on Natural Reinforcements
Byung-Sun Kim, PhD
Principal Researcher
Korea Institute of Materials Science, South Korea
14:41 – 15:00
Nanocellulosic Materials:Advances & Development in Various Polymeric Matrices
Hitoshi Takagi, Dr. Eng.
Professor
Tokushima University Tokushima, Japan
15:01 – 15:20
Application of Confocal Laser Scanning Microscopy Technique for Nano-sized Material Imaging
Panninee Chetprayoon, PhD
Researcher
National Science and Technology Development Agency Thailand
15:21 – 15:40
In situ Probing and Tuning the Physical Properties of Carbon Nanotubes
Prof. Chia-Seng Chang
Director, Institute of Physics
Academia Sinica, Taipei, Taiwan
15:41 – 16:00
Seeing inside atoms: Beyond Atomic Resolution Electron Microscopy
Naoya Shibata, Dr. Eng.
Professor
Institute of Engineering Innovation
School of Engineering, The University of Tokyo, Japan
16:01 – 16:20
3D Electron Microscopy for Life Sciences
Nie Xie, PhD
Scientist II
Thermo Fisher Scientific, China
16:21 – 19:00
Poster Competition, Poster Viewing and Technical Workshop
19:01 – 21:00
Cultural Night (Ballroom 2 & 3, Lake Wing)
29 May 2019
8:00 – 8:30
Registration
8:31 – 8:40
Opening Remarks
Annabelle V. Briones, PhD
Director
Industrial Technology Development Institute, Department of Science and Technology, Republic of the Philippines
PLENARY LECTURES IV
8:41 – 9:00
Advanced Nanocomposites Based on Natural Reinforcements
Byung-Sun Kim, PhD
Principal Researcher
Korea Institute of Materials Science, South Korea
（Dr. Kim had a presentation again.)
9:01 – 9:20
Application of Carbon Nanotubes to Field Emission
Dr. Naesung Lee
Department of Nanotechnology and Advanced
Materials Engineering, Sejong University, Seoul, Korea
9:21 – 9:40
Ultraviolet Photochemistry of Graphene Oxide
Prof. Hiroyuki Sugimura
Nanoscopic Surface Architecture Laboratory
Department of Material Science and Engineering Kyoto University
9:41 – 10:00
Brain-on-a-chip: Using Nanotechnology to Understand Brain Circuit
Vincent Daria, PhD
Fellow, Group Leader (Neurophotonics Group)
ANU College of Health and Medicine Australia
10:01 – 10:20
Exploiting Nanotechnology in Sustainable Agriculture
Leila Ma’mani, PhD
Head
Department of Nanotechnology Agricultural biotechnology research Institute of Iran (ABRI) Karaj, Iran
PLENARY LECTURES V: Nanotechnology Commercialization Workshop
10:21 – 10:40
Nanotechnology Commercialization in Malaysia
Rezal Khairi Ahmad, PhD
Chief Executive Officer
NanoMalaysia Berhad
Kuala Lumpur, Malaysia
10:41 – 11:00
Commercial Applications of Physical Vapor Deposition and Plasma Nitriding in the Philippine Industry
Jonas Javelona
Beta Nanocoating Philippines Inc
Laguna, Philippines
11:01 – 11:20
“Boysen Knoxout” The Air Cleaning Paint
Engr. Vergel Dyoco
Boysen, Inc.
Philippines
11:21 – 11:40
Nanofixit Technologies
Mr. John Moe
NanoFixIt Ventures Inc.
Philippines
11:41 – 12:00
Commercializing Rice-Husk derived Nano-Silica based Products
Dr. Daniel Bien
NanoQuartz Pte Ltd Malaysia
12:01 – 12:01
Nano-enhanced materials for Well-Being Market
Mr. Hafiz Zolkipli
Infusion Materials Lab Pte Ltd Malaysia
12:21 – 13:00
LUNCH BREAK
SESSION I: Nanodevices, nanostructures for electronics, photonics, plasmonics (Ballroom 2, Lake Wing)
13:00 – 13:10
Introduction and instructions
Arnold Alguno, PhD
Mindanao State University
Iligan Institute of Technology Moderator
13:11 – 13:30
Nitrate Reduction using Synthesized Green-Nanoscale Zero Valent Iron (G-NZVI) and Green-Nanoscale Zero Valent Iron-Copper Bimetal (G-NZVI-Cu) using Optimized Extracted Polyphenols from Suganda Leaves
Darwin C. Mojica
Department of Chemical Engineering, Adamson University
13:31 – 13:50
Development Of Ultra-Thin Films Of Nickel Chromium And Its Oxides As Diffusion Barrier For High Temperature Electronic Applications
Dorcas Gazelle Flavier
School of Graduate Studies Mapua University
13:51 – 14:10
First-principles calculation of structural and electronic properties of iodine-doped zinc oxide
Nizel May F. Sumagang
Mindanao State University- Iligan Institute of Technology
14:11 – 14:30
Polymer-Based Graphene Nanocomposite Coating with Anticorrosion and Anti Barnacle Properties
Normie Jean Sajor
Physics Department
De La Salle University
14:31 – 14:50
Coffee Break
14:51 – 15:10
Effect of Silver Doping in the Structural and Optical Properties of Hematite (α-Fe2O3) Synthesized via Chemical Precipitation Method
Aldrin A. Tan
Materials Science and Engineering
Program, University of the Philippines Diliman
15:11 – 15:30
Synthesis and characterization of titanium dioxide/zinc oxide (TiO2/ZnO) nanocomposite via sol-gel method for semiconductor photocatalysis applications
Jose Emmanuel Camacho
Materials Science and Engineering
Program, University of the Philippines Diliman
15:31 – 15:50
Characterization of Supercapacitor Electrodes from Water Hyacinth (Enchhornia crassipes) – Polyester Blended Fabrics with Polypyrrole, Polyaniline, and Carbon Nanotubes
David Joseph Alzate et al.
The Graduate School, University of Santo Tomas
15:51 – 16:10
Jettable Nanobiosilica Ink Formulation
Lea Cristina D. Macaraig, PhD
Chemistry Department, School of Science and Engineering, Ateneo de Manila University
SESSION II: Nanosensors, Nanobiomaterials, and Nanomedicine (Ballroom 3, Lake Wing)
13:00 – 13:10
Introduction and instructions
Manolo G. Mena, PhD
University of the Philippines Moderator
13:11 – 13:30
Particle Film Coverage Alters the Volatile Chemical Emission of Plants
Brandon Cyril S. Lira
Chemistry Department, College of Science De La Salle University
13:31 – 13:50
Synthesis of Cu and Cu2O Nanoparticles Using Calamansi (C.microcarpa) Peel Extract and Its Antimicrobial Activity
Eligia Clemente, PhD
Department of Mining, Metallurgical and Materials Engineering, College of Engineering, University of the Philippines Diliman
13:51 – 14:10
Adsorptive Behavior of Electrospun Nanofibers derived from Rice Straw in Industrial and Agricultural Pollutants
Juvy J. Monserate, PhD
Nanotechnology R & D Facility, Central Luzon State University
14:11 – 14:30
Selective Graphene-based Field Effect Transistor (GFET) Sensor Using Electrochemically Grown Molecularly Imprinted Polymer
Aldrine Abenoja Caganga
The Hongkong University of Science and Technology
14:31 – 14:50
Coffee Break
14:51 – 15:10
Fabrication of Filter Paper-based Colorimetric Sensor using Gold Nanoparticles for Detection of Cyanide in Water
Lyka B. De La Rosa
Material Science and Polymer
Chemistry Laboratory, Caraga State University
15:11 – 15:30
Synthesis, Characterization, and Antimicrobial Activity of Silver Nanoparticles Using Dudoa (Hydnocarpus alcalace C.DC.) Leaf Extract as a Reducing and Stabilizing Agent
Edward Kevin B. Bragais
Pamantasan ng Lungsod ng Maynila
15:31 – 15:50
Green synthesis of magnetic iron oxide nanoparticles using Sargassum crassifolium extract with varied concentration of iron precursor
Marco Laurence M. Budlayan
Premier Institute of Science and Mathematics, Iligan Institute of Technology,University of the Philippines Diliman and Cagayan State University
15:51 – 16:10
Synthesis of Electron Beam Irradiated Polyvinyl Pyrrolidone Kappa-carrageenan Nanogels
Julius Caezar Fajardo
Caloocan City Science High School
SESSION III: Trends in Nanotechnology (Camia, Lake Wing)
13:00 – 13:10
Introduction and instructions
Alberto V. Amorsolo, Jr. PhD
University of the Philippines Moderator
13:11 – 13:30
Wastewater Bacterial Reduction using Green Synthesized ZnO nanoparticles from ficus septica (Lagnub) Leaf Extract
Benito A. Baje
Philippine Science High School Central Visayas
13:31 – 13:50
The Design of a Bench-scale Adsorbent Column based on Nanoclay-loaded Electrospun Fiber Membrane for the Removal of Arsenic in Wastewater
Eden May B. Dela Peña, PhD
Department of Mining, Metallurgical and Materials Engineering, University
13:51 – 14:10
Polymer-clay Nanocomposite Microstructure Modification for Enhanced Properties
Mitch-Irene Kate G. Oyales
Department of Mining, Metallurgical and Materials Engineering, University of the Philippines, Diliman
14:11 – 14:30
Optimized Synthesis of Polymer-based Graphene Oxide Nanocomposite Beads for Methyl Orange Removal from Water using Response Surface Methodology
Camille Margaret S. Alvarillo
Nanotechnology Research Laboratory, Department of Chemical Engineering, University of the Philippines Diliman
14:31 – 14:50
Coffee Break
14:51 – 15:10
Surface Modification of Local Nanozeolites Using Iron for Removal of Heavy Metal Contamination
Mar Christian Que
Industrial Technology Development Institute – Department of Science and Technology
15:11 – 15:30
Effect of Lithium chloride on the Fabrication of Polyvinylidene fluoride Nanocomposite Membrane for the Separation of Oil-Water Emulsion
Mary Rose C. Tuazon
School of Chemical, Biological, and Materials Engineering and Sciences, Mapua University
15:31 – 15:50
Preliminary Studies On The Aquatic Toxicity Assessment in Seawater (ISO 20787:2017) Of Five Commercially Available Nanomaterials In The Philippines
Ronaniel Almeda, et al
UPLB Nanotechnology Program/Agricultural Bio-Process Division, IAE-CEAT, University of the Philippines Los
15:51 – 16:10
AFM Surface Studies of Polysiloxane Nanocoating Applied on Glass Containers
Jorge Carl Jiny T. Ochoa
San Miguel Yamamura Asia Corporation
SESSION IV: Nanotechnology Characterization Workshop (Dahlia, Lake Wing)
13:00 – 13:10
Introduction
Arnold Lubguban, PhD
Mindanao State University
Iligan Institute of Technology
13:11 – 13:30
Advanced TEM and its applications in both materials and biological science
Dr. Tetsuo Oikawa
JEOL Asia
13:31 – 13:50
High quality Nanopowder Manufacturing and Recycling by Induction Plasma Technology
Mr. Gavin Chen
TEKNA Plasma Systems (SUZHOU）CO., LTD, P. R. China
13:51 – 14:10
Phase Analysis of Metal using Electron Backscatter Diffraction Technique
Marlon Llana
Technical and Operations Director – NASAT Labs
14:11 – 14:30
Towards the next generation of Materials Design with in-situ SEM
Dr. Chuan Wei Chung
Product and Application Sales Specialist Zeiss
14:31 – 14:50
Coffee Break
SESSION V: Nanotechnology in Additive Manufacturing (Dahlia, Lake Wing)
14:51-15:00
Introduction
Arnold Lubguban, PhD
Mindanao State University
Iligan Institute of Technology
15:01-15:20
3D-Printed Molds for Injection Molding Application
Dr. John Ryan Dizon
Professor, Bataan Peninsula State University
15:21-15:40
Advances in Processing Nanocomposite for Additive Manufacturing
Engr. Arnaldo Valino
Chairman, Mechanical Engineering Department, Adamson University
15:41-16:00
3D Printing using Advanced and Nanotechnology Materials as Rapid Manufacturing Technique for Semiconductor and Electronics Industry
Dr. Jerome Palaganas
School of Graduate Studies, Mapua University
